Pins or Screw Systems: Which One Should You be Using?

Fastening applications can be challenging, especially when trying to determine the best fastener for the job.  A popular question we are often asked here at R.V. Evans is “when should I use collated pins vs. collated screws in my fastening application?”  Our recommendation weighs heavily on the material you need to fasten together in the application.

In our opinion, the Muro wood to steel floor screws are the best for utility screws-pin-systemstrailers where the customers are attaching 2″ thick wood to a steel frame. They have a larger diameter and a much larger head size than the Aerosmith pins. This holds the wood better and has less chance of pull-through. In most cases, the Muro screw is faster than pre-drilling and using bulk screws. That is its best-selling feature.

The Aerosmith pins are 5-10 times faster than screws. Their pullout values and cost is comparable to collated screws. If they are being used for heavy gauge steel you will need to use the high pressure system.  This requires the purchase of a high-pressure (400 psi) air compressor, hose, and tool. With the low pressure tools, any jobsite compressor will work. For trailers or truck boxes that are fastening plywood or sheeting to steel, there isn’t really any comparison as long as the volume justifies the tool cost. The Aerosmith pins provide a huge labor savings.  We have sold Aerosmith for construction use when the customer was attaching plywood or hardy board to steel studs. Both times the customer was replacing bulk screws with the low pressure Aerosmith system and they loved the speed and ease of use.

If you are unsure whether or not you are using the right fasteners for your specific application or are looking for ways to improve your process, feel free to contact us to set up a free consultation with one of our experienced Fastening Specialists.

Contact us at www.rvevans.com or by calling 1-800-252-5894 or connect with us on our social sites:

TwitterFacebookLinkedinGooogle+

Happy Fastening!

Be sure to connect with

Advertisements

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s