Why Thickness and Price are not Indicators of Tape Quality

When many manufacturers go to market in search of tape to use for case sealing applications, the primary concern often seems to be the tape’s thickness (in mils) and the price. Purchasers often think to themselves, “Okay, which tape has the best mil rating/price ratio?”. However, this can cause many problems.

Let us take a look at a comparison between Shurtape’s AP 180 emulsion acrylic carton sealing tape vs. a competitor’s version.

Shurtape Competitor
Mil 1.9 1.9
Tensile (lbs./in. width) 27 30
Adhesion to Steel (oz/in. width) 44 4
Elongation % at breaking point 150 130
Holding Time (in hours) 15,000 6,000
Figure 1

Figure 1 indicates that the Shurtape brand shares the same mil rating as the competitive tape, and even has a lower tensile strength. However, 27 lbs./inch width is still relatively strong! Additionally, Shurtape’s version maintains 11x the adhesion to steel than the competition, a longer elongation-to-break, and a much longer holding time! This longer holding time and better elongation rate both translate to more economical tape usage and a much longer-lasting seal on your packages. If you are in need of a strong seal that will last long enough for your needs, Shurtape is the way to go.

Of course, it always comes down to the application and its needs. No tape is the single best tape. However, in search of your next tape source, it is very important not to default to the very common, yet flawed analysis of mil thickness/price.

If you need help determining the best tape for your specific needs, contact R.V. Evans Company by clicking here or calling 800-252-5894!

Click here for an overview of case forming and closure/sealing solutions!

Budget Friendly Solutions for Your Packaging Equipment Investment Needs

  1. Do you have a packaging project where new equipment is needed, but the scope of the project doesn’t justify an outright purchase of new packaging equipment?
  2. Do you need to meet an increase in production, but your budget won’t allow a capital investment in new packaging equipment?
  3. Do you experience down time in your packaging line but your budget won’t justify the purchase of a second piece of the necessary packaging equipment?
  4. Is your existing packaging equipment old, maintenance intensive, but money is not available for a replacement?
  5. Do you think your production volume is too low to justify automation in your packaging production line?

If any of these scenarios are preventing your company from investing in the packaging equipment you need for your production line, R.V. Evans’ Equipment Placement Program may be the packaging system solution you need to help take your packaging production process to the next level.

BEL 505 carton former with BEL 252 carton taper.

BEL 505 carton former with BEL 252 carton taper.

R.V. Evans’ Equipment Placement Program specializes in providing budget friendly investment solutions for a variety of new and used packaging equipment including:

For more information on R.V. Evans’ Equipment Placement Program, contact R.V. Evans or schedule an on-site review of your specific packaging application and receive your customized Equipment Placement recommendation and proposal.

Connect with R.V. Evans Company for new packaging and fastening system updates, tips, application solutions, and a little fun stuff too!

FacebookTwitterLinkedinGoogle+