Bostitch Cordless Carton Closing

Getting your cartons closed and out the door absolutely needs to be a quick and efficient process. If your business is spending more than a few seconds just getting your cartons sealed, the process and tools your team is using needs to be examined and changed. Fortunately, Bostitch has a series of Cordless Carton Closers that can improve the durability of your packages while getting them out of your warehouse quicker, and with an added aspect of safety.

Staples are much more difficult to mishandle or manipulate than tape.
Even with improvements in tape application design, staples will almost always be a cleaner, faster, safer, stronger, and more secure way to close your cartons. Bostitch understands this, and offers a line of cordless carton closers that are adjustable and can be used for a wide variety of single and double wall corrugated applications.

Each of the three carton closers offered by Bostitch is a light 6.2 lbs and can support 120 staples per magazine. They also boast a Li-Ion battery with a quick 45-minute recharge. Each tool comes with two of these batteries; both capable of 800 staples per charge, so down time is never an issue. A wide variety of adjustments, including clinch tightness, staple length, and Dial-a-Depth® control means these cordless carton closers can be used for almost any application where a standard or blind clinch is desired. Use the chart below to determine the right tool and fastener combination for any job you’re doing.

fastener specs

When it comes down to it, any business that ships their products in boxes needs an efficient and effective method to help improve their process. These cordless carton closers are a consistent, safe, reliable, and highly portable way to get your product out the door. Contact us or schedule a site-needs analysis to get started on improving your business with the best ideas and best solutions today.

FacebookTwitterLinkedinGoogle+

Advertisements

3 Things You Should Know About Carton Closing

Carton Closing Stapler

Carton Closing Stapler

There are a variety of ways to close and seal a carton. The method that you choose to close the cartons in your packaging process can greatly affect the condition of the product when it arrives to your customer. If the product arrives in poor condition, it not only runs the risk of being returned with a complaint, but it hurts your company’s brand. Using the correct method to close and seal cartons can reduce material costs as well as increase shipping conditions.

There are a variety of methods for closing your cartons including staples, tape, and plastic strap. All are designed for different applications. Some of the most common use of staples and plastic strap is to keep cartons sealed that may contain heavier items that would normally rip tape, whereas tape may be used in applications where higher volume production is present.

These are very basic examples of applications where these carton closing methods would be used, in all truth, each application is unique. There are a variety of factors that must be taken into consideration in order to achieve the optimal carton closing method. 3 important factors are:

1)   Storage and Shipping

One factor that comes into play is; what is happening to the product after it is packaged and the carton is closed? If it is immediately going into ground shipment and it is a heavier item, then staples may be required to ensure that the product stays in the carton. If the product is going off of the packaging line and being placed on a skid to be stacked, you may be able to get away with tape to close the carton.

2)  Production Volume

Another factor is the volume of packaging that is occurring in the application. If you are operating with very low volume, using stick staples in a carton closing stapler may be adequate. As packaging volume increases, your method needs to change to meet the demand. Staples can also come in roll format; these are collated rolls of up to 5,000 on most Bostitch rolls. If volume increases even more, tape systems can meet the demand of higher throughput. Systems like the Wexxar BEL250 are designed to seal up to 25 cases per minute.

3)  Environmental Factors

Another factor to take into consideration is the environment in which the carton is being closed. Dirty and dusty environments can leave residue on the corrugated container making it more difficult for tape to seal, but does not affect carton closing staples. Also, if there is a void around the product, you may risk damaging the product with staples.

There are a plethora of factors that come into play when deciding whether to use tape or staples. Using the correct method will provide better results, reduce wasted material and cut down on costs. Take time to identify some of the factors that may affect your end product to ensure that you are using the correct carton closing method.

Happy Packaging!

For more information you can contact us at 1-800-252-5894 or by visiting our website at www.rvevans.com

You can also connect with us through our social sites:

TwitterFacebookLinkedinGoogle+

Be sure to connect with